3.6V LITHIUM-ION SCREWDRIVER TTO054DDH
screwdriver and not with any other products.
2. Operation instructions
Inspect the screwdriver before using to ensure all
parts are running smoothly and there no abnormal
sounds or sparks. Before driving fasteners, check
behind walls for wire, other electrical hazards or
plumbing. Clear the work area of all parts and
debris that may cause injury by flying objects.
Securely fix the object to be fastened in a vice or
otherwise clamp to avoid injury. Do not attempt
to hold workpiece by hand.
3. Fitting and removing bits
To use any one of the short bits supplied, insert the
bit into the chuck as far as possible. To remove the bit,
simply pull it out of the chuck. (See Fig 2)
4) Fitting and Removing Sockets (sold
separately)
To use the socket, you can simply refer part of”
fitting and removing Bits”.
Just insert the socket into adaptor and then put
them together into bit holder. (See Fig 3)
5. Forward/reverse switch
(See Fig4 & 5)
The forward /reverse switch enables you to
change the rotation movement of the chuck, and
also acts as a lock button. For forward rotation,
release on/off switch, and then depress switch to
right handle side, press switch to left hand side
for reverse rotation, the centre position locks the
drill to off. Always release the on/off switch when
changing rotation. Note the first time you use the
drill after changing rotation, you may hear a click
when the drill is turned on, this normal and does
not indicate a problem.
Fig 4
Fig 2
Fig 5
Forward
Reverse
Fig 3
Socket Socket
adaptor
Socket hold
CSD36L M-070924.indd 11
2007-9-24 14:02:35
