manualshive.com logo in svg

Titan TTB674TAS, Инструкция по эксплуатации

Поделиться
Скачать
Titan TTB674TAS Скачать руководство пользователя страница 54

NOTE: 

When  transporting  the  product  use  only  transportation

devices   and   do   never   use   guards   for   handling,   lifting
or transportation.

Warning: Risk of injury!

Store the product so that it cannot be switched on by unauthorized
persons.
Ensure that nobody can injure themselves on the product while it
is stationary.

Warning: Risk of injury!

During transportation the upper part of the saw blade should be
covered; for example by the guard.

Storage

NOTE: Product damage!

Do not store the product unprotected in a humid environment.

> Always store the product in a dry place.

Transport

Repair

> This product does not contain any parts that can be repaired by the consumer.
   Contact a qualified specialist to have it checked and repaired.
> If the power cord is damaged, it must be replaced by the manufacturer, its service
   agent or similarly qualified person in order to avoid a safety hazard.

> Drop the saw blade to the lowest position.
> Remove the attached parts which protrude over the saw.
> Carry the produce with the help of another person.
> When shipping, use the original packaging if possible.

54

Care and maintenance

TTB674TAS 

by TITAN

 

In

 more 

detail…

GB

IE

Содержание TTB674TAS





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды