Care and maintenance
31
TTB597TCB
by TITAN
In
more
detail…
GB
IE
Warning: Risk of injury!
Store the product so that it cannot be switched on by unauthorized
persons.
Ensure that nobody can injure themselves on the product while it
is stationary.
NOTE:
If a moulded plug is fitted and has to be removed
take great care in disposing of the plug and severed cable, it must
be destroyed to prevent engaging into a socket.
If the supply cord is damaged it must be replaced by a service
agent or a similarly qualified person in order to avoid hazard.
NOTE: Product damage!
Do not store the product unprotected in a humid environment.
Repair
> This product does not contain any parts that can be repaired by the consumer.
Contact a qualified specialist to have it checked and repaired.
> Apart from diamond discs there are no other user serviceable parts inside this tile
cutter. Refer to qualified service personnel if internal maintenance is required. Any
worn, or damaged parts should be replaced immediately by qualified personnel.
Keep discs in good condition. Poor condition or worn discs can increase the noise
level emitted.
> If the supply cable is damaged, it should be replaced by the same type of cable
as the one provided and recommended by the manufacturer (H05 VV-F 3G0.75
mm²). The supply cord of the tool and any extension cord used should be checked
frequently for damage.
> If damaged, have the cordset replaced by an authorised service facility. Replace
the extension cord if necessary.
Storage
> Store the product and its accessories in a dry, frost-free place.
> Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10 and 30°C.
