background image

This product can be used by children aged 

from  8  years  and  above  and  persons  with 

reduced  physical,  sensory  or  mental 

capabilities  or  lack  of  experience  and 

knowledge  if  they  have  been  given 

supervision or instruction concerning use of 

the  product  in  a  safe  way  and  understand 

the hazards involved.

Children  should  be  supervised  to  ensure 

that  they  do  not  play  with  the  product. 

Cleaning and user maintenance shall not be 

made by children without supervision.

If  the  power  cord  is  damaged,  it  must  be 

replaced  by  the  manufacturer,  its  service 

agent or similarly qualified persons in order 

to avoid a safety hazard.

This  product  is  to  be  supplied  through  a 

residual current device (RCD) having a rated 

residual operating current not exceeding 30 

mA.

Prevent access of children with appropriate 

measures.

Do not use when people are in the water.

Do not operate the pump without water.

Make sure that no marine animals (e.g. fish) 

are extracted by the product.

Have in mind that pollution of the liquid could 

occur due to leakage of lubricants.

Protect the electrical connections and cords 

from heat, oil, sharp edges and moisture.

Protect  the  product  from  frost  and  running 

dry.

Avoid  circulation  of  aggressive  fluids  of 

abrasive materials.

Do not use the power cord or the float switch 

cable to transport or secure the product. Fix 

a rope to the handle for submerging, lifting or 

securing

Check and clean the outlet and the inlet of 

the pump when needed.

Do  not  pump  liquids  with  sand  or  other 

abrasive  substances.  It  causes  increased 

wear and reduces the pumps output.

The product is designed for clear water with 

a  diameter  of  suspended  impurities  not 

exceeded 30mm.

The  product  should  be  used  for  pumping 

water temperature below 35°C, do not use 

the product for other liquids (hydrocarbons, 

oils, corrosive liquids, flammable liquids…).

Never use the product in case of danger of 

frost.

The product is not designed for continuous

Pump safety warnings

Содержание TTB583PMP















Отзывы: