CIRCULAR SAW 2000W TTB287CSW
19.
Do not use any abrasive wheels.
20.
Remove the plug from the socket before carrying out any adjustment, servicing or
maintenance.
GENERAL SAFETY WARNINGS FOR LASER
The laser device fitted to this tool is class 2 with a maximum radiation of 1mW and 650nm
wavelength. These lasers do not normally present an optical hazard although staring at the beam
may cause flash blindness
Do not stare directly at the laser beam. A hazard may exist if you deliberately stare into the
beam, please observe all safety rules as follows:
1.
The laser shall be used and maintained in accordance with the manufacturer’s instructions.
2.
Never aim the beam at any person or an object other than the work piece.
3.
The laser beam shall not be deliberately aimed at another person and shall be prevented from
being directed towards the eye of a person for longer than 0.25 seconds.
4.
Always ensure the laser beam is aimed at a sturdy work piece without reflective surfaces, e.g
wood or rough coated surfaces are acceptable. Bright shiny reflective sheet steel or similar is
not suitable for laser applications as the reflective surface may direct the laser beam back at
the operator.
5.
Do not change the laser device with a different type. Repairs must be carried out by the
manufacturer or an authorised agent.
6.
CAUTION!
Use of controls or adjustments other than those specified herein may result in
hazardous radiation exposure.
HEALTH ADVICE
WARNING!
Some dust particles created by power sanding, sawing, grinding, drilling and
other construction jobs contain chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
Lead from lead-based paints.
Crystalline silica from bricks and cement and other masonry products.
Arsenic and chromium from chemically treated timber.
Your risk form these exposures varies, depending upon how often you do this type of work. To
reduce your exposure to these chemicals:
Work in a well ventilated area.
Work with approved safety equipment, such as those dust masks that specially designed
to filter out microscopic particles and use the dust extraction facility at all time.
- Wear ear protectors when using this tool. Exposure to noise can cause hearing loss.
VIBRATION
The European Physical Agents (Vibration) Directive has been brought in to help reduce hand arm
vibration syndrome injuries to power tool users. The directive requires power tool manufacturers
and suppliers to provide indicative vibration test results to enable users to make informed
decisions as to the period of time a power tool can be used safely on a daily basis and the choice
of tool.
Further Advice can be found at www.hse.gov.uk
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
Laser <1mW
Wavelength: 650nm
EN 60825-1: 2007
