Titan ts143, Руководство пользователя

Страница: 10 / 16

Titan Data Series TS143 Owner’s Guide 10
MANUAL TRANSMISSION READY MODE
To remote start the vehicle, you must first place the system in “Ready Mode”. There are 3 different
programming options for doing this. To use a method other than the default setting, you must have
your system re-programmed by an authorized dealer.
Default - Transmitter Activation
1. With the engine running & transmission in Neutral, apply the parking brake.
2. Press and release the Start button on the remote transmitter.
3. Turn off key and remove from the ignition (the vehicle will stay running).
4. Exit the vehicle and make sure all doors are closed.
5. Press the Start button on the transmitter to shut the vehicle off.
6. The vehicle is now in “Ready Mode” and can be started by remote.
Option 2 - Brake Pedal Activiation
1. With the engine running & transmission in Neutral, apply the parking brake.
2. Press and release the brake pedal 2 times (once if it was already on when you applied the park
brake in step 1).
3. Turn off key and remove from the ignition (the vehicle will stay running).
4. Exit the vehicle, upon closing the last door, the vehicle will shut down.***
5. The vehicle is now in “Ready Mode” and can be started by remote.
Option 3 - Park Brake Activation
1. With the engine running & transmission in Neutral, apply the parking brake.
2. Turn off key and remove from the ignition (the vehicle will stay running).
3. Exit the vehicle, upon closing the last door, the vehicle will shut down.***
4. The vehicle is now in “Ready Mode” and can be started by remote.
REMOTE STARTING ALL MODES
1. With the engine off, press the Start button.
2. The park lights will flash and the horn will chirp once (if connected).
3. The vehicle’s ignition system will come on and within 3 seconds, the vehicle will start.
4. The parking lights will flash 5 times to confirm a successful start.
5. The vehicle will run for the programmed runtime (15 minutes default).
If the vehicle does not start, see the diagnostics section on Page 23 for possible solutions.
If you press the Start button on the transmitter while the door is open, the system will go into “Idle
mode” and NOT shut down when you close the door. It will run for the programmed run time or
until it is shut down by the remote. This feature is convenient if you need to open other doors after
having closed yours.
IMPORTANT:
If a door is opened while the vehicle is not running and in “Ready Mode”, the system
will exit “Ready Mode” and will not remote start. You will need to start the vehicle with the key and
repeat the procedure. If you need to open doors and want to avoid repeating the “Ready Mode”
setup again, simply remote start the vehicle and open the door while the vehicle is running. When
you are done, and the doors are closed, you can shut down the vehicle with the remote and “Ready
Mode” will still be engaged.