2
© Titan Tool Inc. All rights reserved.
Important Safety Information
·
Read all safety information before
operating the equipment. SavE ThESE INSTRucTIONS.
This symbol indicates a hazardous situation,
which, if not not avoided could result in death or
serious injury.
haZaRD: ELEcTRIc ShOcK haZaRD
May cause severe injury.
• Power cord must be connected to a grounded
circuit. Do not use a 3 to 2 adapter.
• Always unplug cord from outlet and bleed pressure before
working on equipment.
• Never submerge electrical parts.
• Do not expose the spray system to rain. Always store the
spray system indoors.
haZaRD: EXPLOSION haZaRD DuE TO
INcOMPaTIBLE MaTERIaLS
Will cause property damage or severe injury.
PREvENTION:
• Do not use materials containing bleach or chlorine.
• Do not use halogenated hydrocarbon solvents such
as bleach, mildewcide, methylene chloride and 1,1,1 -
trichloroethane. They are not compatible with aluminum.
• Contact your coating supplier about the compatibility of
material with aluminum.
haZaRD: DuST INhaLaTION
Dust or mist created by this sprayer may cause eye, skin,
throat, or respiratory irritation.
• Avoid inhalation of mist or dust. Wear a NIOSH / MSHA
approved respirator when using this equipment or for
anyone entering the work area.
• Maintain proper ventilation to reduce mist / dust exposure.
• NO EATING, DRINKING, OR SMOKING should be
done in the work area to prevent ingesting contaminated
material particles. Workers should wash and clean up
before eating, drinking, and smoking. Articles of food,
drink, or smoking should not be left in the work area where
dust would settle on them.
• Follow all warnings and recommendations provided by the
textured coating manufacturer.
haZaRD: GENERaL
can cause severe injury of property damage.
• Read all instructions and safety precautions for equipment
and spray material before operating any equipment.
• Comply with all appropriate local, state and national codes
governing ventilation, fire prevention and operation.
• This unit is intended for use with
water-
based textured materials only. DO NOT
use this sprayer with any flammable or oil-
based materials.
• Keep sprayer out of the reach of children.
• Hearing protection is recommended for
extended use.
• Always wear appropriate gloves, eye protection, clothing
and a respirator or mask when spraying.
• Do not aim the gun at or spray any person or animal.
• Do not operate or spray near children. Keep children
away from equipment at all times.
• Do not leave the sprayer energized or under pressure
while unattended. When the unit is not in use, turn off the
sprayer and relieve the pressure in accordance with the
Pressure Relief Procedure.
• Always follow the Pressure Relief Procedure when
shutting the sprayer down for any purpose, including
servicing or adjusting any part of the spray system,
changing or cleaning spray nozzles, or preparing for
cleanup.
• This system is capable of producing 100 PSI / 0.69
MPa. Only use replacement parts or accessories that
are specified by the manufacturer and that are rated a
minimum of 100 PSI. This includes spray nozzles, spray
guns, extensions, fittings, and hose.
• Use only manufacturer authorized parts. User assumes all
risks and liabilities when using parts that do not meet the
minimum specifications and safety devices of the sprayer
manufacturer.
• Do not overreach or stand on an unstable support.
Certain material overspray can make floors slippery. Keep
effective footing and balance at all times. Wear rubber-
soled shoes.
• Stay alert and watch what you are doing.
• Do not operate the unit when fatigued or under the
influence of drugs or alcohol.
• Never modify the pump assembly, air compressor, spray
gun, or any other component of the spray system.
• Check all components of the spray system daily. Repair
or replace any worn or damaged parts immediately.
• Never directly inhale compressed air. Compressed air
may contain toxic vapors.
• Keep hands and other body parts away from the
discharge. For example, do not try to stop leaks with any
part of the body.
• Fittings on the hose, compressor, radiator,
and pump become hot during use. Avoid
skin contact with any fittings when they are
hot. Allow the fittings to cool before touching.
• Know the contents of the material being
sprayed. Read all Material Safety Data
Sheets (MSDS) and container labels provided
with the materials. Follow the material manufacturer’s
safety instructions.
• Do not use the hose as a strength member to pull or lift the
equipment.
• Route hoses away from traffic areas, sharp edges, moving
parts, and hot surfaces.
• Do not kink or over-bend the hose. Hoses can develop
leaks from wear, kinking and abuse.
• Do not expose the hose to temperatures or pressures in
excess of those specified by manufacturer.
• Install the supplied hopper cover onto the hopper before
starting the spray system. When the system is turned on
with only a small amount of material in the hopper, the
hopper cover will prevent material from spraying out of the
hopper.