Titan SF1022, Инструкция по безопасности и эксплуатации

Страница: 11 / 16

6kg SDS PLUS ROTARY HAMMER SF1022 & SF26S6
selector with the arrow on the drill body. There is a
safety lock on the dial selector. When a mode has
been successfully selected the dial selector will
“click” into position.Always make sure it “clicks”
to confirm mode selection.Simply depress the
lock button to move from one mode to another.
10.USING THE DEPTH GAUGE
1. Rotate the handle anti-clockwise, insert depth
gauge into the handle (see Fig13).
2. Adjust the depth gauge to desired depth.
3. Rotate the handle clockwise to tighten the
depth gauge.
11.SAFETY WHEN USING THE ROTARY HAMMER
This is a powerful tool. Caution needs to be
observed when operating. Dress in suitable
overalls. Safety boots are recommended at all
times especially when using the chisel actions.
Proper safety gloves proper safety ear defenders
gloves glasses are also recommended.When
using chisel mode, a dust mask is necessary
because of the cement dust created by the
action.
NOTE: DO NOT USE THE HAMMER WHEN
STANDING ON A LADDER.
12.GEARBOX MAINTENANCE
Always check there is sufficient grease in the
grease box before usage. Check every 5 hrs of
usage. Open the grease box lid at the top of the
drill using the pin spanner provided. Then top
up the grease box (capacity 20gms max) using
the grease provided with your tool. The grease
specification is general purpose lithium based.
(See Fig14)
13.REPLACING CARBON BRUSHES
WARNING!
The carbon brushes and commutator in
your hammer drill have been engineered for may
hours of dependable service.
To maintain peak efficiency of the motor, we
recommend regular inspection of the brushes.
Replace when they wear down to length of about
6mm or less.
To replace the brushes, remove the motor cover,
Fig 12
Fig 13
Fig 10
Fig 11