3
SETUP
STEP 1. OPEN SAFE WITH OVERRIDE KEY
1.
Insert override key and turn left to unlock safe.
2.
Turn knob to right and open safe door.
3.
Override key cover is located in box with key.
STEP 2. INSTALL BATTERIES/HANDLES
1.
Remove battery compartment (
A
) cover on inside door by pressing in and sliding to right.
2.
Insert 4 “AA” batteries
3.
Replace the battery cover.
4.
Do not close door before testing digital lock
5.
Install two handles w/screws provided.
STEP 3. TEST DIGITAL LOCK
1.
With door open, turnknob left to put locking door bolts (
B
) in lock position.
2.
Remove override key and store in a secure place.
NEVER STORE KEYS INSIDE SAFE!
3.
Enter the preset pass code: “1”-“5”–“9”-“B”.
4.
Turn knob to right within 5 seconds.
5.
Lock bolts should recede into the unlocked position.
STEP 4. PROGRAM A NEW PASS CODE
1.
With door open, press reset button (
C
) inside door.
2.
Yellow light is on, enter new pass code in 30 seconds.
3.
Enter new code (3 to 8 digits) followed by “A” or “B”.
4.
Safe will beep and yellow light will turn off.
NOTE: The factory pre-set code will not work after a new pass code is programmed.
OPERATION
TO OPEN THE SAFE
1.
To unlock and open safe, enter the pass code followed by “A” or “B”.
2.
Turn door entry knob to the right and open door.
TO CLOSE THE SAFE
1.
Close the door and hold it in the closed position.
2.
Turn door entry knob to left to engage the lock bolts and lock safe.
SECURE LOCKOUT PERIODS
If a wrong code is entered three times in a row, the digital keypad will begin a five-minute secure lockout period. During this secure lockout
period the keypad will become disabled.
Once the lockout period has expired, the safe can be unlocked using the correct pass code.
You may use the override key to open safe, but keypad will complete the full lockout period.
