Titan HKE-L, Инструкция по эксплуатации

Страница: 2 / 13

HKE-L
H 223 EU 03/11
2. General information
Many thanks for your confidence in the technology of
TITAN Umreifungstechnik GmbH & Co. KG
These operating instructions are intended to simplify familiarisation with the HKE-L and the
possibilities of application for the intended purpose. The operating instructions contain
important information concerning the safe, proper and efficient use of the strapping
tool.
Following the instructions helps avoid risks, reduces repairs and downtimes and
increases reliability and life of the unit.
The operating instructions must always be available at the place of operation of the strapping
tool. They must be read and observed by persons concerned with work on the strapping tool.
This work specifically includes operation, refilling of operating material, fault elimination and
maintenance.
In addition to the operating instructions and the regulations for accident prevention effective
in the country of use and place of application, the recognized technical regulations for safety
and proper working must also be observed.
Explanatory notes on the warning and instruction symbols:
Caution!
Used where there is danger to life and health.
Attention!
Used for danger which cause material damage.
Note!
Used for general information and information which if not followed can cause
faults in the operating sequences.
The manufacturer reserves the right to make changes to the scope of delivery
at any time for the purpose of improving the product.
Copyright © TITAN Umreifungstechnik GmbH & Co.KG 2011 All rights reserved.
The contents of this document must not be duplicated, handed to third parties, published or saved in any form,
neither fully nor partly, without prior written permission by TITAN Umreifungstechnik GmbH & Co.KG.
is a registered trademark of TITAN Umreifungstechnik GmbH & Co.KG.