Before use, download and install Atrato software from memory stick or website.
The Atrato low-flow ultrasonic flowmeter should be setup using the USB interface and a
suitable computer. Below is a screen shot of the Configuration screen.
The panel below shows the functions of the panel on the top left of the screen.
Control buttons to apply the settings and recover previously set parameters.
4 Setup
7
Send settings to system
Retrieve Settings from meter
Open settings file on the computer
Save settings to a file on the computer
Test outputs
Unlock/Lock User Settings
Diagnostic Tools
Software Information
To modify the configuration click “User Settings” tab at the bottom of the screen and
ensure the system is unlocked for editing.
