30
TTB776VAC by
TITAN
In
more
detail ...
Wet vacuuming
> During wet vacuuming, check the water
level in the tank regularly. The water level
should be below the air inlet (9) (Fig. 24).
Empty the tank (4) regularly if large quantities
of water are to be vacuumed.
NOTE:
After wet vacuuming, turn the machine off and remove plug
from power supply; remove the drain cap (8a) and drain the liquid into a
suitable receptacle or drain (Fig.25). Remember to refit the tank with the
drain cap. Make sure the filters and tank are dry and clean before dry
vacuuming.
WARNING!
Do not overfill the tank (4) (max 20 litres)!
Do not fill with any other liquids than water as they might be harmful to
the product attachments and surfaces.
Blowing
This product is designed for light blowing. This operation requires some
accessories and attachments. Consult the section Product configurations for
details.
> Before operation, loosen leaves that are stuck to the ground using a broom or rake.
> Assemble the product according to the desired operation.
9
4
Fig. 24
4
8a
Fig. 25
Operation
