Insert the power cord plug into a wall socket. You are now ready to use your vacuum cleaner.
Operation
WARNING :
># /J##+
the joint and stop the suction. If this happens, simply stand the vacuum upright and turn it off until
+
VACUUMING DRY MATERIALS
> #
#
used when vacuuming liquids.
NOTE:
NEVER USE A VACUUM WITHOUT THE FILTER!
INSTALLATION AND CLEANING
Foam Sleeve – For use during wet applications
WARNING:
Always ensure that the plug is disconnected from power source, the tool is switched
off before making any adjustments or maintenance procedures. Once the motor assembly is up-
side down, slide the foam sleeve down over the cage. Keep sliding it down until it completely
covers the cage.
The foam sleeve should be cleaned regularly as described in the following steps:
1. Unplug the power cord from the electrical outlet before removing the motor assembly. Turn the
motor assembly over. Slide the foam sleeve toward the top of the cage to remove.
2. Shake the foam sleeve up and down quickly.
3. Submerge the foam sleeve in water for one or two minutes, then rinse it from the inside out.
Systematic cleaning with water is not necessary, it depends on the condition of the foam
sleeve.
4. Gently wring out the water, wipe it with a clean cloth, and let it dry. The foam sleeve is now
ready to be reinstalled over the cage.
Cartridge Filter – For dry applications
Q # &
Z & / /
' # / & /
&/&
*# / & J
& / ##
$ &##<[##\
with water, dry completely (approximately 24 hours) and reinstall.
NOTE:
>#
used for wet pick up, it must be cleaned and dried before using for dry pick up.
