manualshive.com logo in svg
background image

 

GENERAL WARNINGS 

 

READ and UNDERSTAND this manual completely before using 3PT Hitch 25 Ton Log Splitter.  

 

Operator must read and understand all safety and warning information, operating instructions, 
maintenance, and storage instructions before operating this equipment. Failure to properly operate 
and maintain the log splitter could result in serious injury to the operator or bystanders. 

 

OPERATION WARNINGS 

 

Do not at any time have people, sit, or stand on the log splitter. 

 

Do not allow children to play on, stand upon or climb on the log splitter. 

 

Never carry any cargo or wood on your log splitter 

 

Always inspect the log splitter before using to assure it is in good working condition. 

 

Replace or repair damaged or worn parts immediately. 

 

Check for hydraulic fluid leaks by passing a piece of paper or cardboard underneath or over 
the area of the leak. 

Do not check for leaks with your hand

 

Always check and tighten hardware and assembled parts before operation. 

 

Do  not  adjust  the  hydraulic  valve.  The  pressure  relief  valve  on  the  log  splitter  is  preset  at 
the factory. Only a qualified service technician should perform this adjustment. 

 

Do not exceed equipment maximum load capacity of 25 tons. 

 

Do not alter the log splitter in any manner. Any alteration will void the warranty and could 
cause the log splitter to be unsafe to operate. 

 

Always operate the log splitter on clear and level ground. 

 

Do not operate the log splitter at night, only during daylight hours. 

 

CRUSH AND CUT HAZARDS 

 

Always keep hands and feet clear from moving parts while operating the equipment. 

 

Always clear and keep work area clean and free of debris when operating. 

 

Always wear safety gear, eye protection, gloves and work boots when operating the log splitter. 

 

 

 

 

 
 

ASSEMBLY IS REQUIRED

 

This product requires assembly before use. See “Assembly” section for instructions. Because of the weight 
and/or size of the log splitter, it is recommended that another adult be present to assist with the assembly. 

INSPECT ALL COMPONENTS

 closely upon receipt to make sure no components are missing or damaged. 

 

WARNING 

The  warnings,  cautions,  and  instructions  outlined  in  this  instruction  manual  cannot  cover 
all possible conditions  or  situations that may  occur. It must  be  understood by  the operator 
that common  sense  and  caution  are  factors  which  cannot  be  built  into  this  product  and 
must  be supplied by the operator.

 

  PROP 65 WARNING 

This product can expose you to chemicals including lead and lead compounds which are known 
to the State of California to cause cancer and birth defects or other reproductive harm. For more 
information, go to www.P65Warnings.ca.gov.

 

Содержание 198376














Отзывы: