16
3.
Pull the outer and inner drivelines apart.
4.
Reattach outer driveline to tractor PTO shaft, and inner driveline to the snowblower
gearbox.
5.
Hold inner and outer drivelines parallel to each other, or as close to parallel as possible:
a)
Measure 1" (
“B”
dimension) back from the outer driveline universal joint shield and
make a mark at this location on the inner driveline shield.
b)
Measure 1" (
“B”
dimension) back from the inner driveline universal joint shield and
make a mark at this location on the outer driveline shield.
