Titan 125FLAILSHFT, Руководство оператора

Страница: 11 / 25

11
NOTE: If the gap shown in figure 1-9 does not meet the hitch bracket weldment installation
requirements, remove the oil inlet pipe, and oil outlet pipe to release the pressure in the
cylinder. That will make it easy to adjust the gap. Reinstall those oil pipes after hitch bracket
weldment installation.
Figure 1-9: Installing Hitch Bracket Weldment and Fittings
STEP 4: INSTALLING PTO PROTECTIVE COVER AND FITTINGS
Remove the packaging of PTO protective cover and fittings.
Use 4pc
BOLTS M8X20 , 4pc PLAIN WASHERS 8 and 4pc SPRING WASHERS 8 to fix
PTO PROTECTIVE COVER to GEARBOX . TIGHTEN BOLTS COMPLETELY.
Figure 1-10: Installing PTO Protective Cover and Fittings
FILL THE GEARBOX WITH PROPER AMOUNT OF SAE 90 GEAR OIL BEFORE OPERATION.