TITAN RADIO TR2X, Руководство пользователя

Страница: 9 / 15

LED Indications
LED Indicator Radio Status
Flashes green Being turned on.
Glows green Receiving.
Glows red Transmitting.
Flashes orange slowly Scanning.
Glows orange
Call hang time: No voice is being transmitted or
received on the channel during a call. Within such
a period, you can press and hold the PTT key and
speak.
Before Use
Attaching the Antenna
1. Place the antenna in its receptacle.
2. Rotate the antenna clockwise until hand tight.
Do not hold the radio by the antenna, as it may reduce the radio
performance and life span of the antenna.
Attaching the Battery
1. Slide the battery latch to the unlock position, and remove the battery
cover.
2. Align the battery contacts with the contacts in the battery compartment,
and press the battery into place.
3. Insert the protrusions at the top of the battery cover into the radio, and
press the cover into place.
4. Slide the battery latch to the lock position.
To remove the battery, make sure the radio is turned off, remove the
battery cover, and lift the bottom of the battery.
Attaching the Belt Clip
1. Use a Phillips screwdriver to turn the screws counterclockwise on the
back of the radio and remove them.
2. Align the screw holes on the belt clip with those on the back of the radio.
3. Put the screws back in place, and use the Phillips screwdriver to turn them
clockwise until hand tight.
Attaching the Audio Accessories
1. Open the accessory connector cover.
2. Plug the accessory into the accessory connector.
3. Turn the screw on the accessory plug clockwise until hand tight.
4