TITAN MODEL KITS KC-30 MRTT, Руководство по сборке

Страница: 4 / 36

I. PARTS PREPARATION
I.A VACFORM PARTS
I.A.1. Remove parts from sheet:
Carefully remove the parts by cutting along the silhouette of the part with a sharp utility
knife. You may find it helpful to mark the cut lines with pencil prior to cutting. Always
cut from the top of the parts, never from the bottom. Multiple shallow passes will always
yield a better result than trying to cut through on a single pass.
.
© Titan Model Kits Revision 1.0 6 Mar 2022
4