Titan Fitness PWR1-PWR2, Руководство пользователя

Страница: 4 / 9

4
ASSEMBY TIPS:
BUILD ON A FLAT AND LEVEL SURFACE.
AVOID TIGHTENING BOLTS COMPLETELY UNTIL THE RACK IS FULLY ASSEMBLED.
STEP 1: ASSEMBLING THE BASE
•
Attach the two Lower Side Bracings (3) to the Lower Rear Bracing (1) using
four M12x80 Hex Bolts (15) , four Flat Washers (14) , and four M12 Flanged
Lock Nuts (13) . For proper installation, the square holes on the Lower Side
Bracing must be installed facing downward.
Note: One Flat Washer should be placed on each of the M12x80 Hex Bolts to
seat on the back side of the Lower Rear Bracing with the Flanged Lock Nut
installed on the Lower Side Bracing.
•
Install the four Plastic End Caps (6) to the ends of the Lower Side Bracing and
Lower Rear Bracing.
•
Install the two Round Caps (11) on the ends of the two weight plate holders
that are attached to the Lower Rear Bracing.