c. Validate the voltage outputs of the Kronus 1 are active by adjusting the dials to the lowest
setting and using a voltage test meter, fan or 120 Volt light to verify power is flowing through the
controller.
d. Ensure that your equipment is ‘ON’ and set at the maximum level.
e. Verify that the Kronus 1 is set at the proper levels to activate and deactivate equipment.
f. If your equipment does not turn off, verify that your exhaust fan or dehumidifier are the correct
size for your grow area. Increase size of equipment, (if necessary).
g. Check the remote sensor to verify that the green LED is steady ‘ON’ and NOT blinking.
h. If the green ‘ON’ LED on the Kronus Temperature and Humidity sensor is blinking, there is a
communication problem between the sensor and the controller. Contact your Dealer or our
Technical Service Representative to assist you.
i. If you are still having problems with your Kronus 1, please contact our Technical Service
Representative to assist you further.
Controller Specifications:
• Size = 9.5”H x 8.5”W x 2.5”D
• Weight = 3 lbs.
• Input Voltage = 120 Volts/AC
• Output Voltage = 120 Volts/AC
• Maximum Amperage = 15 Amps
• Operating Hertz = 60 Hz
• Minimum/Maximum Humidity Control Levels = 40% to 90% (non-condensing)
• Humidity Accuracy = ±5% of desired setting
• Minimum/Maximum Temperature Control Levels = 45° to 95°F (7° to 35°C)
• Temperature Accuracy = ± 2°F of desired setting
• RoHS compliant = Yes
• Cord set = 6 feet - 14/4 SWJ
• Remote Sensor Cable = 25 feet/Cat 5e/RJ45
• Storage Temperature = 32° to 135°F (0° to 58°C)
• Operating Temperature = 45° to 95°F (7° to 35°C)
Installation Example
Kr
onus 1
120 V
olt
Power in
Dehumidifier
Exhaust Fan
Remote Sensor (25 feet)
Kr
onus
Sensor
Controlling a Dehumidifier & Exhaust Fan
