Titan Controls 702855, Инструкция по эксплуатации

Страница: 3 / 16

3
Eos
®
2 Digital Humidity Controller
Overview
The Eos
®
2 is a digital humidity controller with a 15 foot sensor which features a
accurate humidity sensor, as well as a photocell to adjust for day and night use.
The unit can control a humidifying or dehumidifying device, with separate day and
night humidity settings.
Operation Instructions
Dehumidify Mode: If set-point is 80%rH and the humidity is over 80% rH, the dehu-
midifier will be active until it lowers the humidity level to 80% rH - 5 % rH = 75% rH.
Humidify Mode: If set-point is 80% rH and the actual humidity is below 80% rH, the
humidifier will be active until it raises the humidity level to 80% rH + 5% rH = 85%
rH.
Humidify/Dehumidify Mode: Press the knob for 3 seconds and turn to select the
mode: (1) Humidify or (2) Dehumidify. Press the knob again to save the set-point.
The correlated LED will be lit. Click the knob and the display will read “day”. Press
and turn to set the day humidity level. Press again to enter night humidity setting.
The display will read “nite”, turn to set and save the setting by another press.
Day mode: The controller is active only when the photocell senses light in the grow
space.
24 hours: The controller is active both during the day and night.
Night mode: The controller is active only when the photocell senses darkness in the
grow space.
Output: LED is lit when the output is active.