4
7.
Do not operate close to ditches or creeks. Slow down when operating over rough
ground.
8.
When adjusting the angle of the moldboard assembly, be sure that your feet are
never under the rear blade.
9.
Be careful to avoid catching the rear blade on stumps or other immovable
objects.
MAINTENANCE SAFETY
1.
Keep all persons away from operator control area while performing
adjustments, service, or maintenance.
2.
Periodically tighten all bolts, nuts and screws and check that all cotter pins are
properly installed to ensure unit is in a safe condition.
3.
Never use your hands to locate a hydraulic leak on attachments. Use a small
piece of cardboard or wood.
4.
Never replace hex bolts with less than grade five bolts unless otherwise
specified. Refer to bolt torque chart for head identification marking.
STORAGE SAFETY
1.
Store the unit in an area away from human activity. Do not permit children to
play on or around the stored unit.
2.
Make sure all parked machines are on a hard, level surface and engage all safety
devices.
3.
If blocking is used, make sure it is solid and secure before leaving area. ALWAYS
OBEY ALL SAFETY RULES! ALWAYS BE CAREFUL!
ALWAYS OBEY ALL SAFETY RULES!
ALWAYS BE CAREFUL!
