1 ea.
99 0153 0000
Siphon pump with 10' hose
1 ea.
99 0154 0000
Grounding Wire Assembly
1 ea.
98 0000 0572
Front Jeep Gladiator Bracket
1 ea.
98 0000 0571
Rear Jeep Gladiator Bracket
2 ea.
98 0000 0573
Jeep Gladiator Rail Bracket Aluminum
4 ea.
99 0000 0957
5/16"-18 Hand Knob, 0.906" Length
1 ea.
99 0000 0565
Sidekick Toe Clamp
2 ea.
99 0000 0526
1/4"-14 Steel Drilling screw, 1" Length
1 ea.
99 0000 0185
TITAN™ Warranty Envelope
I. Installation of Sidekick Tank
Step Description
1
Place tank body over the passenger side wheel well.
2
Use provided Hand Knobs to attach the Aluminum Rail Brackets to the front and
rear Jeep Gladiator Brackets. Leave them slightly loose for now.
3
Slide the combined brackets up the tapered ends of the tank body and insert
them into the Jeep Bed Rails.
4
Position the brackets and tank into the desired position, then tighten the Hand
Knobs down securely.
5
Place the provided Toe Clamp into the bottom cutout of the tank. Use the 2
provided self-tapping screws to secure the Toe Clamp to the bed.
6
Attach and run the grounding wire from the grounding stud to a mounting bolt.
Be sure the tank is grounded to a steel part of the vehicle body which is
grounded to the chassis.
