Tisira TSH60X, Руководство пользователя, Страница: 6 / 12

RECIRCULATING
DUCTED
WARNING //
DO NOT penetrate any screws
into the range hood as this may result in
electrical hazards.
WARNING //
Failure to install the screws or
fixing device in accordance with these
instructions may result in electrical hazards.
DUCTED OPTION
1. Remove the filter.
2. Optional - Replace the 80mm front rail
with the 40mm front rail. (inc in box)
3. Make sure that internal switches are in
ducted position. (see above)
4. Determine the most efficient path for the
ductwork, minimise bends and keep the
length of the ductwork to a minimum.
5. Before fixing the range hood, drill a hole
to accommodate the 120mm ducting that
you have selected.
6. It is important to run and finish all
ducting (install roof / wall caps) prior to
installation of the hood.
7. Ensure that access has been allowed for
the power cable and plug.
8. Hold the hood up to the underside of the
cabinet. Screw the rangehood to the
underside of the cabinet. Ensure that you
do not damage any of the wiring during
installation.
9. Attach the ducting adaptor to the ducting.
10. Re-install filter.
11. Plug in the power to the unit, turn on and
test.
RE-CIRCULATING OPTION
1. Remove the filter.
2. Remove the front cover to expose the
front vents. Do not remove the top
120mm outlet cover.
3. Make sure that internal switches are in
recirculating position. (see above)
4. Drill 4 fixing holes as per the drawing.
Ensure that access has been allowed for
the power cable and plug.
5. Hold the hood up to the underside of the
cabinet. Screw the rangehood to the
underside of the cabinet. Ensure that you
do not damage any of the wiring during
installation.
6. Re-install filter.
7. Plug in the power to the unit, turn on and
test.
Note //
When the rangehood is re-circulating,
carbon filters should be installed.