Tisira TCT60, Руководство пользователя

Страница: 10 / 16

pg
10
www.tisira.com | tisira
operaTinG
insTrUCTions
USING THE TOUCH CONTROLS
The controls respond to touch, so you don’t need to apply any pressure.
use the ball of your finger, not its tip.
You will hear a beep each time a touch is registered.
Make sure the controls are always clean, dry, and that there is
no object (e.g. a utensil or a cloth) covering them. Even a thin
film of water may make the controls difficult to operate.
USING YOUR CERAMIC HOB
1. Touch the ON/OFF control.
After power on, the buzzer beeps once, all the indicators light up for 1
second then go out, indicating that the ceramic hob has entered the state
of standby mode.
2. Place a suitable pan on the cooking zone that you wish to use.
Make sure the bottom of the pan and the surface of the cooking zone are
clean and dry.
3. Select a heat setting by touching the or control.
If you don’t choose a heat setting within 1 minute, the ceramic hob will
automatically switch off. You will need to start again at step 1.
You can modify the heat setting at any time during cooking.
WHEN YOU HAVE FINISHED COOKING
1. Turn the cooking zone off by scrolling down to
or
or touching and control together.
+ -
5
-
- --
- -
OR