Tisira TCK60, Руководство пользователя

Страница: 8 / 16

pg
8
www.tisira.com | tisira
insTallaTion
Cut out the work surface according to the sizes shown in the drawing. For the purpose of
installation and use, a minimum of 50mm space shall be preserved around the hole.
be sure the thickness of the work surface is at least 30mm. Please select heat resistant work
surface material to avoid deformation caused by the heat radiation from the hotplate.
L W H d A b X
590 520 50 46 560 490 50
under all circumstances, make sure the ceramic cooker hob is well ventilated and the air
inlet and outlet are not blocked. Ensure the ceramic cooker hob is in good working state.
NOTICE //
The safety distance between the hotplate and the cupboard above
the hotplate should be at least 760mm.
A B C D E
760 Min 50 Min 20 Air intake Air exit 5mm
BEFORE LOCATING THE FIxING BRACKETS
The unit should be placed on a stable, smooth surface
(use the packaging). do not apply force onto the controls
protruding from the hob.
Fix the hob on the work surface by screw four brackets on
the bottom of hob. (see picture) after installation.