23
INSTALLATION MANUAL
MODEL: LUNA-BEDSIDE
TIS CONTROL LIMITED
RM 1502-p9 Easey CommBldg
253-261 Hennessy Rd Wanchai
Hong Kong
TEXAS INTELLIGENT SYSTEM LLC
SUITE# 610. 860 NORTH DOROTHY DR
RICHARDSON
TX 75081.USA
Copyright © 2020 TIS, All Rights Reserved
TIS Logo is a Registered Trademark of Texas Intelligent System LLC in the
United States of America. This company takes TIS Control Ltd. in other
countries. All of the Specifications are subject to change without notice.
w w w . t i s c o n t r o l . c o m
Luna Bedside Touch PaneL
TRouBLeshooTinG
The panel’s white LED blinks
rapidly.
Reason:
The panel address conflicts with
another device in the TIS network. You need
to press and hold any of the touch buttons for
6 seconds so that the panel can get a new
address.
The panel buttons’ LEDs do not
turn ON, and the device is not
powered.
Reason 1:
There is no TIS-BUS power or no
connection to the L/N input (if used AIR bus-
3W converter).
Reason 2:
The TIS 24V power supply is not
connected to the TIS-BUS.
The wall panels fail to pair with
other devices.
Reason 1:
The TIS-BUS connection has a
problem, or the wire has a short.
Reason 2:
The manual programming
function is disabled on the device (it is
enabled by default).
The wall panels fail to control
the device channels.
Reason 1:
The TIS-BUS connection has a
problem, or the wire has a short.
Reason 2:
The programming address is
faulty.
Reason 3:
The panel is locked. You need to
unlock it by swiping from right to left on the
panel’s middle row buttons.
