clean wheel solutions
GmbH
26
Maintenance
Failure
Maintenance as needed:
· Clean light barrier
· Remove dirt from the quick clamping device for
wheel fitting using the abrasive cloth enclosed.
Clean (see picture on the right) and check for free movement.
-> For repurchase: 3M-Scotch-Brite grinding/polishing fleece
grain size 280
After approx. 150 to 180 washes or in case of decreasing efficiency
· Dispose of cleaning water (through light fluid seperator)
· Clean stainless steel tub. Remove residual sediments and refill with new cleaning agent
(approx. 2% solution: In 270 l water 5 kg cleaning agent "Tiresonic UR 2.xx")
On completing the cleaning, make sure to reset the counter for the cleaning of the tub (see
page 24).
In general, when errors occur contact the customer service!
(Service-Hotline:
+49 (0) 1805 / 881333-3*
)
9
B
eh
av
io
r
in
C
as
e
o
f
F
ai
lu
re
a
n
d
M
ai
n
te
n
an
ce
If abnormal errors occur while operating the wheel washing machine, disconnect
electricity, take out of service, secure against unauthorized usage and contact
the customer service. All repairs must be performed by trained personnel.
i
Note
Assuming normal use, the wheel washing machine should be maintenanced annually
by the customer service.
9. Behavior in Case of Failure and Maintenance
i
Note
*
0,14Euro/Min from the German landline network / mobile phone charges may vary, max. 0,42 Euro/Min.
