TM
Zeus Series: microZEUS with Flying Bus Boards
Creating Longer Bus Boards:
The Flying Bus Boards were designed for standard 19” (84HP) racks. If it becomes
necessary to extend your Flying Bus Boards, the process is simple: purchase
another Flying Bus Board and connect the female end to the last male connector
on the existing Flying Bus Board.
Adding More Power Connectors:
If it becomes necessary to add more power connectors
purchase another Flying Bus Board and install it on the
additional port as shown in the picture (right).
Please note: As you keep adding more modules to your
system make sure to monitor the heat of the uZeus face
plate and the power adapter so to not overheat them
as they might get damage if overloaded.
