4
OSC-1/2 Explained.
The knobs labeled OSC-1 and OSC-2 control the frequency of two of the oscillators
out of the total 3 oscillators in the RS909 circuit. A dot on the scale indicates the
setting of the original 909 machine, at this point the sound is same as the original.
Moving the knobs the other direction will change the frequency of these oscillators
and give more variations to the sound.
MixBus jumper.
Setting the jumper on the two pins will connect the output of this module to the
MixBus of the MIXZ mixer module. If MixBus is not used please keep the jumper
only on one pin, either pin is fine. For more information on MixBus please see MIXZ
user guide.
Tips & Tricks:.
Creative Gate Sequencing with the Z8000:
Please see BD808 User manual for in depth information.
Step Sequencing the traditional way:
Please see BD808 User manual for in depth information.
