Mixing Control Voltages
1.
Connect saw wave output of Z3000 to the audio input of Z2040, connect the output of
Z2040 to your sound system.
2.
Connect the output of Z4000 ADSR envelope to input 1 on MIX7.
3.
Connect the output of a second Z4000 to input 2 on MIX7.
4.
Connect the output of a third Z4000 to input 3 of MIX7.
5.
Connect the 16 step output of Z8000 to input 4 of MIX7.
6.
Connect the mix out of MIX7 to the frequency modulation input of Z2040.
Trigger the 3 envelopes from 3 separate tracks of Circadian Rhythms, clock Z8000 from the
main Circadian Rhythms clock output. Now run the sequence. By creatively arranging your
gate patterns that trigger the envelopes and mixing in modulation sequence you can
create very interesting modulation patterns.
Connect The Sound Of Your Mobile Phone To Your Modular
MIX7 can even be used to amplify a weak signal. It’s not the ideal way of doing that, but what hap-
pens if you don’t have a dedicated amplifier module handy? Use Stackcables to send your phone
audio to all 7 inputs on MIX7, (make sure MIX7 is set to UNITY MODE). MIX7 has now multiplied
the gain of your phone by 7, making it usable for use in the modular.
http://tiptopaudio.com/mix7-analog-summing-mixer
Содержание MIX7
Страница 1: ...www tiptopaudio com...
