TIPTEL Ergophone 6020+, Руководство по эксплуатации

Страница: 12 / 64

Initial use
12
Note: Stickers with arrows are affixed to the charger connector
and the charger cradle. The two arrows must be pointing
at each other when the connector is plugged into the
charger cradle. If it is not easy to insert the connector in-
to the jack, check the direction and avoid applying force.
Place the telephone in its closed position in the charger; the battery
now charges. During the charging process, the red battery LED at the
front of the device blinks. When the charging process is complete, the
battery LED goes out.
Note: Instead of charging via the charger cradle, the power
supply plug can also be connected directly to the jack
on the underside of the telephone. The battery can also
be charged via a computer's USB connector. In both
cases, the arrow on the connector must be pointing to-
wards the back of the phone (towards the SOS button).
Battery performance diminishes over time. If you notice after a time
that you need to recharge your phone more frequently, replace the
battery.
For safety reasons, the battery switches off before it is totally
discharged. If you have not used the telephone for a long time,
wait up to 10 minutes after you have plugged in the charger. This
switches the battery back on and the charging process starts.