TIPTEL 332 CLIP, Руководство по эксплуатации

Страница: 10 / 44

Settings
10
Settings
Programmable parameters
Language ............................... German, English, French, Italian or Dutch.
Time ........................................ Here, you can set the time.
Date ........................................ Here, you can set the date (day, month, year).
Voice-day-and-time-stamp ... On or Off. If you select “on”, the day and time be-
longing to the ICM are indicated at the end of each
message.
Network time ........................ On or Off. If your telephone network or your PABX
transmits the time, it can be adopted by the internal
clock (the year is not transmitted and has to be set
manually).
Length of incoming ...............
messages
1 to 5 minutes or endless. Here, you can limit the time
a caller has at his disposal to speak a message.
Recording quality .................. Level 1 or 2, whereas level 2 has the highest re-
cording quality. An increasing recording quality
means a decrease of available recording time. Level
1 corresponds to about 50 minutes and level 2 about
25 minutes recording time.
Ringing tones ........................ 2 to 9 ringing tones. This is to set the number of
ringing tones until the answering machine picks up.
Remote control code ............ The remote control code consists of 1 to 4 digits
ranging from 0 to 9999. The code “-” is used to
deactivate the remote control.
Remote pre-interrogation ..... Yes or no. If you selected “yes”, and new incoming
messages exist, your tiptel 332 CLIP will pick up after
2 ringing tones (regardless of your settings for the
number of ringing tones). If no new incoming
messages exist, the device picks up after the number
of ringing tones according to your settings. Thus, you
can identify whether new messages have been re-
corded or not and whether a remote interrogation
needs to be performed or not.