AUDIO OUT
ETHERNET
AUDIO IN
AUDIO IN
POWER
POWER
SPEAKER
SPEAKER
+ L - - R +
+ L - - R +
CLASS 2
WIRING
(4
Ω
MINIMUM)
CLASS 2
WIRING
(4
Ω
MINIMUM)
+ -
+ -
AZTS7
FG5026
TouchS
TREAM7
®
®
magined b
y
Y
OU
D
esigned b
y
TiO
E
ngineer
ed b
y Experts
A
ssembled in the
USA
S
hipped
with Gr
atitude
FCC
ID#:
2AA
08-AZSS1
IC:
11338A-AZS
S1
24V
3.75A
© Anuva Automation, Inc. StealthStream, TiO
, T
urn iT On, and the TiO logos are
registered trademarks of Anuva Automation, Inc. All rights reserved. All other marks are the property of their respective owners.
Protected by U.S. Patents
29/467,806
Serial Number Label
Ethernet
RJ45 Connector
Optional wired Ethernet when not using Wi-Fi.
Optional device power with AZPC1
Audio Output
Stereo line level audio
(1V peak)
3.5mm connector
Optical Audio Input
(TOSLink)
Auto sensing with
Auto A/B switching
configured in TiO App
Speaker Output
Class 2 Wiring
Minimum of 4 ohms
50W RMS x 2 channels
Removable Connector
with screw terminals
Power Input
24VDC, 90W
Removable Connector with screw terminals
Connect LPS or Class 2 power supply only
Highly recommended to use TiO branded supplies
Connections
Dimensions
AZTS7 Install Guide
®
AUDIO
OUT
ETHERNET
AUDIO IN
POWER
SPEAKER
+ L
- - R +
AZTS7
CLASS 2
WIRING
(4
Ω
MINIMUM)
7 1/4”
4 7/8”
1/2”
3 5/8”
Rubber Blocks (4)
Dual Lock (4)
Wiring Installation
© 2016 Anuva Automation, Inc. v031616
Direct Power
Power over CAT5 cable.
WARNING: The AZTS7 must be powered only by a TiO power
supply designated as suitable for the AZTS7. Use of any
other power source may damage the AZTS7.
WARNING: DO NOT connect BOTH a directly connected power
supply and power over Cat 5. Power must come from one
source only. Powering from two sources at the same time will
damage the AZTS7 and void the warranty.
In Existing Buildings
(i.e. Volume Control
Replacement
situations), these
wires are pre-
existing.
To MC2 for Ethernet
(Not required if
connecting wirelessly)
AUDIO
OUT
ETHERNET
AUDIO IN
POWER
SPEAKER
+ L
- - R +
AZTS7
CLASS
2
WIRI
NG
(4
Ω
MI
NI
MUM)
Rubber Blocks (4)
Dual Lock (4)
To Speakers
AZPC1
inserted anywhere
along the Cat5 cable.
AZPS1NA
or
AZPS1INT
at Home Run
AZPS1NA
or
AZPS1INT
at
Home Run
To MC2 for Ethernet
(Not required if
connecting wirelessly)
AUDIO
OUT
ETHERNET
AUDIO IN
POWER
SPEAKER
+ L
- - R +
AZTS7
CLASS 2
WIRING
(4
Ω
MINIMUM)
To Home Run
Rubber Blocks (4)
Dual Lock (4)
To Speakers
Ethernet Input:
6VDC, 10W MAX
LPS or Class 2,
Power Input:
24VDC, 90W
LPS or Class 2,
FERRITE INSTALL
Speaker wires - Prior to attaching the connector to the speaker wires, loop all four leads
through the solid core twice. Then attach the connector and plug into the AZTS7.
Power Cable - Prior to attaching the connector to the power cable, loop the cable
through the solid core twice. Then attach the connector and plug into the AZTS7.
Ethernet Cable - Open the split core and wrap the Ethernet cable around twice. Close
the split core and plug into the AZTS7.
