Tinysine TOSR196, Руководство пользователя

Страница: 5 / 14

www.tinysine.com
4
H
ow to use
USB Control Mode
You need remove the Bluetooth module from the board first when you use it in USB
control mode.
Step1:Intall the Driver
This module uses FT232RL USB to UART chip . Before using it you will need to download
the
FT232RL Driver .
Connect TOSR196 to computer and windows will detect it and ask for the drivers. Point
windows to the inf folder and it will install the driver. A new com port will now appear.
Step2: Run Realterm Serial Debug Tool to control TOSR196
The TOSR196 relay board is controlled using serial command. Here we use Realterm, but
your favorite terminal should work fine.
(1) Open Realterm, choose option “ Port ”, set the communication speed to 9600 8-N-1 and
disable flow control then click “ Open ”, you should see the parameters from the bottom.