TINY TNC-G10, Руководство по эксплуатации

Страница: 7 / 18

7
Continuous and start can be set by pressing the key4 in Home screen.
SPEED AND FEED:
Speed determines the speed at which motor1 and motor2 rotates. Its maximum value
can be set in Setup menu. However, in home screen, it can be altered in the range set
entered in setup menu. Use up navigation key to increase the speed and down
navigation key to decrease the speed. Feed controls how far the table moves on the
Y-axis. Feed defines the increment in Y-axis. Use right navigation key to increase and
left navigation key to decrease the feed value. Press Ok button to enter in the set up
screen of the respective mode selected.
Jogging
Jogging can be done by pressing left and right
navigation keys for motor1 (motor X) and by
pressing up and down navigation keys for motor2
(motor Y). Press Esc key as shown to enter in the
jog screen from Home screen.
Setup screen
Press Ok in Home screen to enter in the setup
menu. Make all the settings about the enabling and
disabling of sensors, motors’ steps, dir, acceleration
settings and many other Setup commands. These
commands are discussed late in Setup Menu
commands section.
The limit for the travel of Motor1 (X-axis) and the Motor2 (for Y-axis) can be fixed
manually as well as by sensors. It is also set in Setup menu. Refer to Setup Menu for
more details.