Warning
The mobile app continuously displays the battery level so you will know each time the battery needs recharging.
The Tintag needs battery recharging when the battery level is shown to be 0%.
Attention!
The operating temperature range lies between -20 C and 60 C.
5.
Charger
Warning
When your mobile application shows a battery level of 0% the battery needs recharging. Be careful, the Tintag
will keep operating only for a limited amount of time if you don’t recharge the battery.
The Tintag can be placed in any position on the home base charger, with the logo facing upwards. When placed
on the charger and when initiating the charging procedure, all the four LEDs in the corners will flash for a short period
of time. Then, the LED in the lower-right will toggle slowly during the charging period. During all this time you can
monitor the battery level from your mobile app. When the battery is full, a green LED will also toggle, to inform you
that you can replace the Tintag from the home base charger. The home base charger can be connected to any USB
port of a device.
Figure 15: The Tintag Placed on the Recharging Module
Information
The lower-right LED on your Tintag will signal that charging is taking place and a green LED will let you know
the battery is fully charged.
9
