Tinkerine Studio Ditto Pro, Руководство по установке и эксплуатации, Страница: 13 / 17

LCD Menu Settings
Additional LCD Menu Settings
Besides using the Print and Wizard option from the main menu, the Temp , Control , and Status menu offer several features that are essential to
the operation of the printer.
Temp
In the Temp menu, select Preheat to heat the hotend to printing temperature. The
hotend will remain heated until Cooldown is selected from the same menu or until
the printer is switched off.
Uses for the Preheat function:
1. Preheating the hotend prior to printing to reduce wait time.
2. Heat up the hotend for filament removal or manual extrusion.
Exit
Preheat
Cooled Down
Temp: 24 C
Status
The Status screen is the default screen display during printing. When the printer is
idle, this screen can be accessed by selecting Status from the home screen.
(A) Progress bar and percentage of current print.
(B) Current hotend temperature in degrees Celcius.
(C) Elaspsed time on current print.
(D) Time remaining on current print (Estimation may vary).
DittoPro ready.
A
B
C
D
Control
The Control menu contains different printer functions.
(A) Printer’s firmware version.
(B) Moves the extruder to the home position.
(C) Engages / disengages printer motors [For debugging].
(D) Heats up the hotend and extrudes a small length of filament.
(E) Turns on/off print surface cooling fans [For debugging].
(F) Toggles LCD dial sensitivity.
Enable
Dial Fan On Extrude
Exit
A B C
D E F
12