ECO 100+ Automatic Regulation of Burning
9
6
USING AUTOMATIC REGULATION OF BURNING
6.1
Start
Starting burn control launches a new controlled-burn process. At start, the EAI shutter opens fully to
provide maximum airflow into the firebox. An audio signal of 3 short beeps is played to confirm
successful launch.
Burn control can be started automatically or manually:
•
Automatic
•
When SDS is activated
•
Using the Magnetic Door Sensor, when installed
•
Manual
•
Pressing the START button in the mobile app
•
Pressing a mechanical button, when installed
Burn control must be restarted whenever refueling!
When using the Magnetic Door Sensor, turn SDS off.
6.2
Refueling
When refueling is needed, the control unit emits a beep signal (1 long beep + 4 medium-length
beeps). The mobile app
displays refueling requests by moving the “Burn
ing phase
” indicator to
position B.
Always adhere to fuel quantity and type recommendations provided by the heating system
manufacturer!
7
SAFETY INSTRUCTIONS
7.1
What to Do in Case of Power Outage
In the event of mains power failure to the automatic regulation process, there is no need to reduce
or stop heating, regardless of which phase the burning control program was in at the time of the
outage. However, unless you have purchased the return spring shutter option, keep in mind that the
air intake shutter will have remained in whatever position it was in before power failed.
If you subsequently need to refuel, it is
essential
to manually open the air intake shutter to the 100%
position.
If your heating system includes a water heat exchanger, you cannot continue heating
during a power outage. Potentially dangerous unmonitored increases in exchanger water
temperature and pressure could occur, as the water pump cannot circulate and cool the
water.
Once electric power has been restored, no further manual changes to the combustion control system
are required.
