Hand Control Programming- TDH8D
Version 3 August 2021
7 of 9
7
5.
Presetting the Desk Starting Height
(1)
Press
button until the desk reaches its lowest position and then release
button. Re-press
button again for 5 seconds and the digital display will flash for 10 seconds.
(2)
Adjust the starting height number with the
or
button.
(3)
After 10 seconds, the display will stop flashing and this will confirm that you have successfully set the
starting height.
6.
Restore Factory Setting
(1)
Refer to Chapter 2-Reset: after the “beep” sound, press
and
buttons together for 15 seconds, the
control box will twice make a “beep” sound.
(2)
The settings below will restore to the original factory settings:
Memorized position
Desk starting height
Upper and lower height limit
T-touch or TCS1 sensitivity
