Hand Control Programming-TDH27P
Version 1 July 2021
10 of 12
10
9.
Adjusting built-in T-touch or TCS1 sensitivity
1.
Press memory buttons 1 & 2 for 5 seconds; the display will show the current sensitivity level (0~9) by
flashing.
(Note 4)
2.
Press the
or
button to adjust the sensitivity level. If no button is pressed within 5 seconds, the
system will resume normal operation mode.
3.
After adjusting, press memory buttons 1 & 2 again (or wait for 5 seconds), and the handset will go back
to normal operation mode.
While adjusting the sensitivity, if the TCS1 is connected with the control box, which has built-in T-touch,
both sensitivities will be changed simultaneously.
Level
-0-
-1-
-2-
-3-
-4-
-5-
-6-
-7-
-8-
-9-
Sensitivity
Cancel
T-touch
Less sensitive
(Default)
More sensitive
Note 4: Some control boxes may not support this functionality. If the control box does not support built-in T-touch or
no TCS1 is connected, the display will show 0-0.
10.
Restore Factory Setting
(1)
Refer to Chapter 2-Reset: after the “beep” sound, press
and
buttons together for 15 seconds, the
control box will twice make a “beep” sound, and the digital display will show “---. “
(2)
The settings below will restore to the original factory settings:
●
Memorized position
●
Desk starting height
●
Upper and lower height limit
●
T-touch or TCS1 sensitivity
