Hand Control Programming-TDH24P
Version 1 August 2021
6 of 8
6
If either P1 or P2 is higher than the current height of the table, press and hold the memory setting button
and tilt up the Toggle switch. Then, the toggle switch will indicate the height of the memorized position
and move to the lower memorized height FIRST. If users press and hold the memory setting button and
continuously tilt up the toggle switch, the desk will move to the higher memorized position.
5.
Presetting the Desk Starting Height
(1)
Perform the Chapter 2-Reset. When finished with the reset, press (and hold) the memory setting button
for 10 seconds. During the operation, users will see “P” on the display. Please disregard it and continue to
press and hold the memory setting button.
(2)
This enters the setting mode, leading the display to start to flash.
(3)
Users can tilt either up or down to the desired starting height number. When finished with the setting,
release the memory setting button for 5 seconds. It will save the new starting height automatically.
(4)
Once it is completed, the display will stop flashing.
6.
Restore factory setting
(1)
Perform the Chapter 2-Reset. When finished with the reset, press (and hold) the memory setting button
and tilt down the toggle switch for 15 seconds.
(2)
It will indicate “---“ on the display, and the control box will make a long “beep” sound for 2 seconds.
Release the toggle switch to restore the factory setting.
(3)
The settings below will restore to the factory setting
Memorized Position
The Desk Starting Height
