Hand Control Programming- TDH15
Version 3 August 2021
7 of 7
7
5.
Power Saving Function - Waking up the
Control
The digital display automatically turns off if no buttons are pressed within 25 seconds. Press any button
to light up the display again.
The system goes into <0.1W standby mode
(Note 3)
if no buttons are pressed within 30 seconds. Long
pressing any button will wake up the system and show desk height on the digital display.
Note 3: It depends on the control box whether it will support 0.1W standby mode or not.
6.
Restore Factory Setting
(1)
Refer to Chapter 2-Reset: after the “beep” sound, press
and
buttons together for 15 seconds, the
control box will twice make a “beep” sound.
(2)
The settings below will restore to the original factory settings:
Memorized position
Desk starting height
Upper and lower height limit
T-touch or TCS1 sensitivity
