4
Operating Instructions
Unwind the FM wire antenna and extend it to its full length.
Unwind the AC power cord completely and insert the plug into a 120V/60Hz AC outlet. Use an outlet that is always ‘live’.
Do not use an outlet that is controlled by a wall switch.
When the clock is connected to the AC outlet for the first time the display will turn on and begin flashing “12:00 (PM)”. If
you have not installed the back up batteries the Low Battery indicator will also appear in the display.
Setting The Current Time
NOTE:
The time can only be set when the clock radio is in the OFF mode. If the radio is playing, press and hold the
POWER/MODE/ALM RESET button until the display briefly shows ‘OFF’ and then reverts to the time.
1. If the display is flashing, press the HOUR /
button to advance the display to the correct hour. If the display is not
flashing press and hold the CLOCK button until the display begins to flash, then press the HOUR /
button to advance
the display to the correct hour. Observe the PM indicator to confirm that you have set the hour correctly. If the PM
indicator is ‘On’ the hour on the display is PM. If the PM indicator does not appear the hour on the display is AM.
2. Press the MIN /
button to advance the display to the correct minute.
3. When the correct time is flashing on the display press the CLOCK / PRESET / PAIR button once more. The display
stops flashing and the clock begins to run.
Setting The Alarm Time
This Timex clock radio has dual alarms that can be set and used independently. The initial default alarm settings are 6:00
AM for Alarm 1 and 7:00 AM for Alarm 2. The procedure for setting both alarms is the same.
NOTE:
The alarm times can only be adjusted when the clock radio is in the OFF mode. If the radio is playing, press and
hold the POWER/MODE/ALM RESET button until the display briefly shows ‘OFF’ and then reverts to the time.
1. Press and hold the ALM 1 button until the Alarm 1 time and the Alarm 1 Buzzer indicator begin flashing in the display, then
release the button.
2. Press the HOUR /
button to advance the display to the desired wake-up hour. Observe the PM indicator to confirm that
you have set the wake-up hour correctly. If the PM indicator is ‘On’ the wake-up hour on the display is PM. If the PM
indicator does not appear the wake-up hour on the display is AM.
3. Press the MIN /
button to advance the display to the correct wake-up minute, and then release the button.
4. Press the ALM 1 button once more to confirm the wake-up time setting or after 10 seconds the display will stop flashing
and the new wake-up time will be entered automatically. The display will return to the correct time of day but the Buzzer
indicator will remain ‘on’ in the display indicating that the Alarm 1 is now set to wake you to the buzzer.
5. Repeatedly pressing the Alarm button will cycle through “wake to” sources; Buzzer > Radio > Bluetooth >OFF. The Buzzer
indicator and the alarm time will display. Press the ALM 1 button once more to select the Radio alarm. The Radio indicator
remains ‘on’ together with the alarm time. Press the ALM 1 button once more to select the Wake to Bluetooth mode. The
BT indicator remains ‘on’ together with the alarm time. Press the ALM 1 button once more to cancel the alarm function.
The alarm indicators disappear and the display returns to the correct time.
6. Follow the same procedure to set the Alarm 2 wake-up time.
Содержание T331
Страница 14: ...T331 041014 B Printed in China...
