Setting Clock Time and Alarm Time
Setting Clock Time
Rotate the
Clock-Set Thumbwheel
control to set the clock
to the current time.
Setting Alarm Time
Rotate the
Alarm-Set Thumbwheel
control to position the
Alarm Hand
to the desired alarm time.
Note:
This is an analog clock, with a 12-hour display. The time
and alarm can not distinguish between AM and PM
times, so if the
Mode Switch
is activated the alarm
will sound during both AM and PM times.
Operating the Alarm and Snooze Features
1. Set the alarm time as indicated above in
Setting Alarm Time.
2. To wake to the radio, set the
Mode Switch
to the AUTO
position. When the alarm sounds, the radio will play the station
the clock is set to (see
Listening to Radio).
The radio will only
play when the
AC Power Cord
is plugged in.
3. To wake up to the buzzer, set the
Mode Switch
to the
ALARM position. When the buzzer alarm sounds, the clock
backlight will also flash.
4. When the alarm sounds, you may turn off the alarm or activate
the Snooze feature. To turn off the alarm, set the
Mode
Switch
to Off.
Note:
When the alarm sounds, it will play for a maximum of 40
minutes or until manually stopped before turning off
automatically. This cycle will repeat every 12 hours until
the alarm is deactivated.
5. To use the snooze feature, press the
Snooze/Backlight
Button
. The alarm will turn off for approximately nine minutes
before sounding again. You may repeat this process several
times during the 40-minute snooze cycle.