Timewatch ULTraFP 804 FF Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 51

Timewatch ULTraFP 804 FF Скачать руководство пользователя страница 38

Fingerprint Access Control Terminal

·

User Manual

2.

Configure the attendance rule.
On-work Advanced Time: The allowable early duration to go to work.
Latest On-Work Check Time: The allowable late duration to go to work.
Absence Time (Late): The late arrival threshold duration.
Off-Work Early Time: The allowable early duration to get off work.
Latest Off-Work Check Time: The allowable late duration to get off work.
Absence Time (Early Leave): The early leave threshold duration.

3.

Press the ESC key and select Yes to save the settings and exit the interface.

Notes:



The unit is minute.



The available time range is from 0 to 1440 minutes.

Setting Normal Shift Attendance

Steps:
1.

Select an attendance type in the Normal (Normal Shift) interface.

Notes:



By default, the normal shift type includes 2/Day (2 times per day), 4/Day (4 times per day), and
30 custom types.



The following steps will take Custom 1 as an example.

2.

Select Edit and press the OK key to enter the Edit Shift interface.

«
...
36
37
38
39
40
...
»

Содержание ULTraFP 804 FF




















































Отзывы:

Нет отзывов