3
Introduction
The device is based on fingerprint verification technology for time attendance purpose.
Beside fingerprint, standard verification method is password, which can be implemented
together. Other optional verification method is RFID card, this might differ on provider
(please refer to your provider info).
Fingerprint sensor is adopting Auto-Sense system, which automatically turning on the
lamp of the sensor when a finger is placed and automatically off after a few seconds when
there is no finger is placed. This function is meant to prolong the life time of the
fingerprint sensor.
Communication methods between hardware and computer are available with TCP/IP
(Ethernet LAN), USB cable, USB Disk.
Note: USB cable and USB disk should not be used at the same time together.
The device is a Stand-Alone system, which means it does not need to be connected to
computer during work progress.
It can store the users logs into its internal memory and administrator might download the
logs data into computer at any schedule.
Power supply is provided by using adaptor 9V or rechargeable battery (optional).
