timetac Evo Basic, Начало работы

Страница: 20 / 25

Network settings
Navigate to the system settings menu and tap on
Communication 1
followed
by
Interrupt communication
2 . Within this menu 3 please make the following
settings:
•
the interface should be defined as
LAN
•
the Active Mode should be set to
No
•
the HTTP Mode to
Yes
or
secure
Tap on
LAN Parameters 4
. Here you define the following settings:
•
DHCP is should be set on
Yes
In order to enable the time clock to establish a functioning internet connection,
the following
PORTs
must be activated within your internal network.
•
80(HTTP Yes)
•
443(HTTPS or Secure)
•
8000
By default, 8.8.8.8 is used as DNS.
If there is a permanent IP address, open the menu item LAN
Parameters
4 , set
DHCP to No
and correct the entries IP
and Gateway.
i
2
1
3
4
4
38 39