5
6
Manual Override
• It is possible to manually override the
programmed time by operating the override
switch located in the bottom left hand corner
of the plug-in timer.
• 1 = ON. O = OFF.
• If you use the manual override it will self-cancel
at the next programmed time.
• The override switch cannot be used within
15 minutes either side of a switching time.
Points to note
• Each time the time controller has carried out an
automatic switching operation the manual switch
cannot be operated for about 15 minutes before,
and after, automatic switching because it will be
mechanically locked for this period.
• If required you can programme your time
controller to switch OFF only by inserting just a
single pin. For many electrical appliances you can,
therefore, programme for OFF only to ensure that
if you forget to switch the appliance off nothing
