background image

13

10.13 Use the Up/Down arrow buttons to choose the day of the week you 

wish to copy the Programme to e.g. Tue, and press the Select button 
once to confirm.

10.14 Use the Up/Down arrow buttons to choose the next day of the week 

you wish to copy the Programme to e.g. Wed, and press the Select 
button once to confirm.

10.15 Repeat step 10.14 until you have copied the programme to all 

of the days of the week that are required.

10.16 Press the Set button twice to exit the programme entry.

Note:

If no button is pressed, it will time out after 60 seconds and return 
to the mains screen showing day, time and output status. 

The display light will also time out after 15 seconds after the last 
button is pressed.

The Set button can be pressed twice to exit the copy function 
at any stage.

Copy and the day of 
the week will flash

Use the Up/Down arrows to 

choose the day you wish to copy 

the Programme to e.g. Tue

Use the Select button 
to confirm and copy 
the Programme

Copy and the day of 
the week will flash

Use the Up/Down arrows to 

choose the next day you wish to 

copy the Programme to e.g. Wed

Use the Select button 
to confirm and copy 
the Programme

Содержание TRT034N





















Отзывы: